Motorola 68P02958C00-B - Manual (Page 158)

Downloader
5-101
Identify the IP Gateway to which the download will be performed, by default, the local RTU.
To define a remote IP Gateway, specify the Site ID and Link ID. Next specify the various
download parameters. The values for the parameters are changed by clicking in the cell and
either typing or selecting from a choice list. Finally, select the files to be downloaded to the IP
Gateway. Pick the desired file type and locate the desired file. Drag the file names into the
session text area or right-click on the file name and select Add to the desired session(s). Files
such as Site Configuration, Network Configuration, Phone Book, etc. can be downloaded. A
new version of the system software can be downloaded, though a separate download settings
file is used.
Additional sessions to the same or different IP Gateways can be defined in the same way.
Click on the Add Session icon or select Add New Session from the Edit menu, or right-click
on an existing session and select Add Session. Each new session added is named SessionX
where X represents the session index of the current file. Use the Edit menu (when the session
name is selected) or right-click on the session name to rename, delete, copy, cut, and paste the
session.
The settings can be saved in the .ini file for future downloads. A download session can be
saved in a file, then slightly modified for use with other IP Gateways.
To print the current .ini file, right-click on the session name and select Print.
When the download session is defined, click on the Download icon to download the files to
the IP Gateway. If no communication has been set up, you will be prompted for the password
to the IP Gateway. To download only one session within the .ini file, right-click on the session
name and select Download this session.
During the Download process, the ToolBox displays its current status and actions being
performed, as shown below.