Motorola 68P02958C00-B - Manual (Page 259)

IP Gateway Web Operation
6-24
4. To send the Error Logger messages from the screen via email, click on the Send Error Log
by Email icon in the bottom left-hand corner of the screen. A new mail message will be
opened in the PC's mail program and all errors retrieved from the site in the last session
will be copied to the body of the message. Type in the destination address and send the
message.
For a full description of the IP Gateway Toolbox Error Logger, see the SW Diagnostics &
Loggers section above. For a full list of the Error Logger messages, see the Error Messages
section below.
Retrieving Software Diagnostics using the Web Server
The Software Diagnostics program allows access to each of the modules (or “devices”) that
handle the various tasks of the MOSCAD RTU according to their logical names. The Software
Diagnostics program provides reports on the status of each device at different levels of
breakdown. It also provides historical and statistical data on the device activities. The
Software Diagnostics data is useful for system maintenance, problem identification for remote
services and statistics data on the communication system performance. The Web server
enables the user to retrieve software diagnostics from the IP Gateway remotely, over the web.
To read software diagnostics from the IP Gateway, do the following:
1. Follow the instructions under the Accessing the Web Server section above.
2. Click on the Software Diagnostics link from the list of MOSCAD Tools. The following
screen will be displayed.
3. Select the device name from the Device pull-down menu. If the device name does not
appear on the list, click on the Open Device List button. This retrieves the full list of
devices from the site.
4. Next enter the Level at which the diagnostics will be performed. All devices in the system
have a level of request, starting from Level 0. Level 10 gets the data and resets all