Ausync, 3000 level = 0 – Motorola 68P02958C00-B User Manual
Page 418
Software Diagnostics Output
C-126
AUSYNC
## 3000 LEVEL = 0
Operation mode:
Is synchronized (1=YES, 0=NO):
%%1
SYNC interval (seconds):
%%2
Number of links (includes zones):
%%3
Number of authenticated links:
%%4
Server SiteID:
%%5
Server LinkID:
%%6
Server link index:
%%7
Maximum drift (seconds):
%%8
RX SYNC interval (seconds):
%%9
TX SYNC REQUEST interval (seconds):
%%10
TX AFTER RESTART retry (seconds):
%%11
Maximum network delay (MSEC):
%%12
RX SYNC timer (seconds):
%%13
TX AFTER RESTART timer (seconds):
%%14
TX SYNC REQUEST timer (seconds):
%%15
Requested signals (HEX):
%%16
Link device interface function (HEX):
%%17
1. Is the RTU synchronized or not.
2. How frequently a SYNC message is to be sent.
3. The number of links (includes zones) attached to the RTU.
4. Number of authenticated links on the RTU.
5. Site ID of the Server RTU which provides synchronization.
6. Link ID through which the RTU is connected to the Server.
7. Server link index
8. Maximum number of seconds by which the timestamp of an incoming message can differ from the
RTU clock.
9. RX SYNC interval (seconds): %%9
10. TX SYNC REQUEST interval (seconds): %%10
11. TX AFTER RESTART retry (seconds): %%11
12. Number of milliseconds added to network delay (MSEC): %%12
13. RX SYNC timer (seconds): %%13
14. Number of seconds TX AFTER RESTART timer (seconds): %%14
15. Number of seconds TX SYNC REQUEST timer (seconds): %%15
16. Hexadecimal Requested signals (HEX): %%16
17. Hexadecimal Link device interface function (HEX): %%17