Motorola 68P02958C00-B - Manual (Page 176)

Dial Up
5-119
The Open dialog box defaults to the config sub-directory of the Toolbox (itbox550) directory.
The config sub-directory is where Toolbox stores dial-up files by default.
Select the configuration file (see parameters below) and click Open to load it.
Dialog box parameters
Use the parameters in the order specified below. Normally you’ll only use the File Name
parameter.
Look in
If the currently displayed directory is not the correct one, double-click the arrow to the right of
the Look in parameter and locate the drive/directory. To access sub-directories, double-click
parent directories.
File Name
Type the name of the dial up file. ToolBox automatically adds the .dlp extension.
Alternatively, locate the file name in the file list, and double-click the name.
Files of Type
This box shows the type (extension) of the files currently displayed in the File Name list. If the
displayed file type “filter” is not .dlp, open the drop-down list and select the .dlp type.
Close
The Close command closes an existing file.
Save
The Save command stores the current dial-up file.
If the file has not been saved at least once, Toolbox opens the Save As dialog box where you
assign a name to the file. (See below.)
If the file has been saved at least once, Toolbox just saves the file.