Motorola 68P02958C00-B - Manual (Page 242)

Adding Terminal Server Ports
6-7
•
Two RS232 ports can have the same TCP port ID only if they reside in different Terminal
Servers.
Site Configuration for Terminal Server
In order for the IP Gateway to be able to work with Terminal Server the following
configuration should be applied:
1. Click on the IP port tab in the IP Gateway Site Configuration.
2. Right click on the Terminal Server and select ‘Define’. The Ports Overview item will be
displayed.
3. Double-click on the Ports Overview item. The Terminal Server Definition window will be
displayed, as shown below.