Motorola 68P02958C00-B - Manual (Page 294)

Software Diagnostics Output
C-2
## 17 LEVEL = 1
Minisession Channels
--------------------
Minisession Key Application ID
--------------- -----------------
This is the applications table that uses the mini-session API for communication purposes. For each
application this table records the key for the instance of the mini-session, and the application ID.
## 18 LEVEL = 2
Master Channels
-------------------
Transport Key Slave: Site Port Link
------------- ---- ---- ----
This table defines the logical channels located above the Presentation layer, and capable of initiating
communications. For each channel the table records the call destination. The destination address
consists of the site ID, the port ID, and the link ID.
## 19 LEVEL = 3
Slave Channels
--------------
Transport Key Master: Site Port Link Channel Id
------------- ---- ---- ---- ----------
This table defines the active logical channels that can react to communications from ToolBox, the control
center, MCP-M, or MCP-T. For each logical channel, the table records information about the SRC that
initiated the call, namely, the site ID, link ID, Port ID and the identification number of the logical channel
that was used for the call.
## 20 LEVEL = 4
Frame Sequence Channels
-----------------------
Frame Seq Key Application Id
------------- --------------
The Frame Seq Key field holds the key of the application that should receive the frames originating from
the corresponding application on the transmitting side, specified in the Application ID field.
## 21 LEVEL = 5
Exp Send L_dup State T_reset T_dup T_hole B_reset B_ack
Exp The expected sequence number.
Send The sequence number of the next frame sent.
L_dup The last sequence number that can be accepted as the sequence of a duplicated frame.
State The status registered in the internal status engine.