Motorola 68P02958C00-B - Manual (Page 409)

Software Diagnostics Output
C-117
## 2751 LEVEL = 1
******************************
* MPT1327 hardware registers *
******************************
CURRENT MODE (from device key) : %%1
ASYNC_MODE=0 , SYNC_MODE=1
SCON1 (Config register) : %%2
ASYNC_MODE = 00D6 h
SYNC_MODE = 30D6 h
SCM1 (Mode register) : %%3
ASYNC_MODE = 013D h
SYNC_MODE = 093C h
DSR1 (Data sync register) : %%4
ASYNC_MODE = 7E7E h
SYNC_MODE = 7E7E h
SCCE1 (Event register) : %%5
ASYN (CTS,CD,IDL,BRK,CCR,BSY,TX,RX)
SYNC (CTS,CD,IDL,TXE,RXF,BSY,TXB,RXB)
SCCM1 (Mask register) : %%6
ASYNC_MODE = 1F h
SYNC_MODE = 1F h
SCCS1 (Status register) : %%7
ASYNC_MODE = 07 h
SYNC_MODE = 06 h
*****************************
* PORT A REGISTERS (PORT 3) *
*****************************
PACNT (PORT A Control register)
: %%8
ASYNC_MODE = 0373 h
SYNC_MODE = 0373 h
PADDR (PORT A DATA direction register): %%9
ASYNC_MODE = 1884 h
SYNC_MODE = 1884 h
PADAT (PORT A DATA register) : %%10
ASYNC_MODE = AB23 h
SYNC_MODE = AB23 h
The contents of each hardware register are shown. For each register, the preset value is displayed
for both ASYN (MAP27) and SYNC (HDLC) modes. The user should verify the current state of
the system (Async or Sync) before comparing the contents of the register to one of the preset
values.
1. CURRENT MODE of operation.(ASYNC_MODE=0 , SYNC_MODE=1)
2. SCON1 register parameters (See MC68302 Manual Pages 4-28,4-49)
3. SCM1 register parameters (See MC68302 Manual Pages 4-31,4-49)