Motorola 68P02958C00-B - Manual (Page 39)

Hardware Installation
3-4
Mechanical Installation
The IP Gateway unit can be supplied with the following two configurations:
Gateway with communication interface
In this configuration, the Gateway is mounted in an NEMA4 housing, suitable for wall
mounting and composed of the following:
• Stand-alone Gateway unit
• Radio unit applicable for the required frequency range and power, or alternatively, line
unit applicable for interfacing to dedicated or dial-up lines.
• A 110V AC power supply + charger (produces +12V DC for the Gateway’s logic board
and charges the battery); a 220V AC power supply is available as an option.
• 12V DC battery rated for 5 Ah operation (10Ah battery is available as an option).
Figure 3-2: IP Gateway with Communication Interface