Motorola 68P02958C00-B - Manual (Page 458)

Error Messages
C-166
Error #1152: Channel Not Init – Msg Id: %% Msg Type: %%
Uninitialized X25/LAPB channel.
May indicate system software problem. Consult product group.
Error #1153: Intr_ID: %% Code: %% Len: %% Params: %%
X25 internal errors.
CODE :
1 Rx frame discarded no header
2 Rx frame discarded inactive Intr.
3 Rx frame discarded Intr. not establish
4 Rx frame discarded packet too short
5 Rx frame discarded bad GFI
6 Rx frame discarded unassigned lcn
7 Bad interface state
8 Bad interface state
9 Bad lchan state
10 Rx a DL_DICS_IND from lower layer
11 Rx a DL_DICS_CNF from lower layer
12 Timeout when executing restart
13 Transmit t_frame failed
14 Received r_frame failed
15 Timeout when executing reset
16 Undefined packet type.
17 Inconsistent Qbit.
18 Dbit=0, Mbit=1, and not full
19 Can't split t_frame: No mem
20 Received a DIAGNOSTIC packet
21 Packet too long
22 No msg for packet copying
23 Rx DL_CONN_CNF without asking
24 No msg for Ind. to upper
25 Net congestion/operational
26 Received reg.cnf without Req.
27 Received a restart packet
28 Registration request timeout
Error #1154: LAPB ID: %% Code: %%
LAPB internal errors.
CODE :
1 Unsolicited S, F=1 (code A)
2 Unsolicited DM, F=1 (code B)
3 Unsolicited UA, F=1 (code C)
4 Unsolicited UA, F=0 (code D)
5 Unsolicited DM, F=0 (code E)
6 Peer initiated re-connect (code F)
7 SABME retry limit (code G)
8 DISC retry limit (code H)
9 Status enquiry retry limit (code I)
10 N(R) error (code J)
11 FRMR received (code K)
12 Unimplemented frame (code L)
13 I field not permitted (code M)
14 Frame with wrong size (code N)
15 N1 error (code O)
16 N(S) error
17 Cannot tx control: no memory
18 Cannot pass control to lower
19 Cannot pass I to lower
20 No confirmation from lower
21 Frame(s) in garbage queue
22 Cannot pass I to upper
23 Unexpected P/F bit in UI
24 Rx frame discarded (no header)