Motorola 68P02958C00-B - Manual (Page 182)

Site Date & Time
5-125
Site Date & Time
This parameter displays the current date and time at the site, and cannot be edited. While
the tool is sending a command to the IP Gateway, the string “?? ?? ??” will be displayed in
the Site Date & Time Field.
Site
The information below identifies the IP Gateway with which the Site Date & Time tool
will communicate.
Local
When this box is checked, the Date & Time functions are performed on the locally
connected IP Gateway. The default setting for communication is Local.
Remote
When this box is checked, the Date & Time functions are performed on the remotely
connected IP Gateway. and the appropriate Site ID and Link ID must be specified.
Site ID
When the Remote box is checked, the Date & Time functions are performed on a remote IP
Gateway at the specified Site ID connected to the PC via the specified Link ID.
Link ID
When the Remote box is checked, the Date & Time functions are performed on a remote IP
Gateway connected to the PC via the specified Link ID.
Get
Gets the IP Gateway Date & Time, and displays it in the Site Date & Time box.
Set
Sends the current computer Date & Time to the IP Gateway. Make sure that the PC Date
& Time are correct.
Sync
Select this command to synchronize all the sites in the system to the PC Date & Time.
When the Sync button is clicked, the following dialog box is displayed:
In the Link ID drop-down list, select All Links to synchronize the entire system, or select a
specific Link ID. Note that All Links does not work on DIAL.
If the synchronization is successful, a message will appear.
Press the Cancel button to abort the Sync function.
Icons
The following command icons are available in the toolbar.