Motorola 68P02958C00-B - Manual (Page 386)

Software Diagnostics Output
C-94
14. Timeout in seconds in which no data was received and disconnecting/reactivating SLIP/PPP.
15. Time elapsed in seconds since the last received SLIP/PPP data from port.
16. Is PPP/SLIP driver in the process of being disconnected?
17. Is PPP/SLIP driver in the process of being connected?
18. Not relevant.
19. Not relevant.
20. Was an AT response noted when receiving data in SLIP/PPP mode? An AT response can be
ERROR, +CME ERROR, AT, ATH, etc. It indicates that the modem has moved to command mode
and therefore the driver needs to be disconnected.
21. Not relevant.
22. Not relevant.
## 2301 LEVEL = 1
PPP Status
---------------
LCP
Layer Status: %%1
IPCP Layer Status: %%2
PAP
Layer Status: %%3
CHAP Layer Status: %%4
PPP State
---------------
LCP
Layer State: %%5
IPCP Layer State: %%6
PAP
Layer State: %%7
CHAP Layer State: %%8
Terminate Configure Failure
--------- --------- -------
LCP Layer Retry: %%9 %%9 %%9
IPCP Layer Retry: %%10 %%10 %%10
PAP Layer Retry: %%11 %%11 %%11
CHAP Layer Retry: %%12 %%12 %%12
PPP Configuration My Their Negotiated
----------------- ------------ -------------- ----------
Asyncctl : %%13
Magic : %%14
Maxmtu : %%15
Auth protocol: %%16
Quality protocol: %%17
Protocol comp. : %%18
Address comp. : %%19
IP Address : %%20
Tcp Compressio : %%21
Tcp Comp Max slot: %%22
Tcp Comp slot : %%23
1. Status of LCP layer (up or down).