Motorola 68P02958C00-B - Manual (Page 414)

Software Diagnostics Output
C-122
3. Number of Abort sequences.
4. Number of frames with non-matching addresses.
5. Number of frames which had to be retransmitted.
6. Counter which measures if the Async receive descriptors are full. This number s hould be zero. If
not, there might be a problem with the values of the radio’s timers. This should be checked
using the RSS of the radio)
7. Counter which measures if the Async transmit descriptors are full. This number s hould be zero. If
not, there might be a problem with the values of the radio’s timers. This should be checked
using the RSS of the radio)
IMAP27
## 2800 LEVEL = 0
Imap27 information :
Map27 state :%%1
IMap27 mode :%%2
Link ready :%%3
1. Map27 state: One of: “Idle", "OutCallWait", "Active", "WaitForDisconnect".
2. Map27 mode One of: “CONTROL", "DATA".
3. MAP27 link to the local radio indication.
## 2801 LEVEL = 1
Imap27 States information :
Map27 state :%%1
IMap27 mode :%%2
Init done :%%3
Initiator bit :%%4
Warmup done :%%5
New convtable :%%6
Link ready :%%7
Failed transmit frame:%%8
Last site id
:%%9
Last imap27 addr :%%10
Max txpacket size :%%11
Last txpacket size :%%12
Initiator hang count :%%13
Responder hang count :%%14
Hang count
:%%15
Retry hang count :%%16
Initiate dial count :%%17
Connect2Start tx wait:%%18
Last transmitted Map27 frame:19
1. Map27 state: One of : “Idle", "OutCallWait", "Active", "WaitForDisconnect".