Motorola 68P02958C00-B - Manual (Page 68)

Site Configuration
5-11
Dialog box parameters
Use the parameters in the order specified below.
Save in
If the currently displayed directory is not the correct one, open the Look in list and locate the
directory. To access sub-directories, double-click parent directories.
File Name
Type the name of the configuration file. Site Configuration automatically adds the extension.
Alternatively, locate the file name in the file list.
Save as Type
This box shows the type (extension) of the files currently displayed in the File Name list.
There is only one file type in the drop-down list. Config File (.cfg).
Close WorkSpace
The Close WorkSpace command clears the current configuration data from the screen and
workspacebar.
Download
The Download command is used to download a site configuration file to the IP Gateway (to be
stored in the FLASH memory). You can download to the IP Gateway directly connected to the
ToolBox computer, or to a remote IP Gateway.
This command also enables you to change the Site ID and system address of the IP Gateway
unit.
Before activating the Download command:
•
Make sure that you have opened the correct configuration file - the one that contains
the configuration for the IP Gateway you are communicating with. Use the Open
command to open a configuration file.