Motorola 68P02958C00-B - Manual (Page 466)

Error Messages
C-174
Error #1915: Unsupported 'connect to' %% device in MDLC over IP port
‘Connect to’ parameter is not supported by this system. This is provided for
future configuration having new drivers that will be downloaded to older
systems that does not support them.
Error #1916: MDLC Compression not supported in Slip/PPP port
This error is set when future configurations that support MDLC compression on
Slip/PPP will be downloaded to older systems that do not support it.
Error #1917: MDLC confirmed link not supported in Slip/PPP port
This error is set when future configurations that support MDLC link capability
between adjacent sites on Slip/PPP will be downloaded to older systems that
does not support it.
Error #1918: Dial operation not supported in Slip/PPP port
This error is set when future configurations that support dial operation on
Slip/PPP will be downloaded to older systems that do not support this feature.
Dial operation is a qualifier specifying when RTU needs to connect and initiate
Slip/PPP. When not used or not supported RTU is always connected.
Error #1919: Dial number not supported in Slip/PPP port
This error is set when future configurations that support dial numbers on
Slip/PPP will be downloaded to older systems that do not support it. Dial
number is an alternate string (such as phone number) used when connecting to
modem instead of common ATD. Even though not supported, user can still
specify this string and others by using a Standard Modem configuration through
a downloaded IP Modem file.
Error #1920: %%
This error is set when there was a problem reading/executing a command from
the IP Modem file. The IP Modem file is read when configuring a Standard
Modem for Slip/PPP port.
Error #1940: Port connection type changed to slip
This error is set when a PPP configuration was downloaded into a system that
does not support PPP (such as systems with small FLASH). Slip is used instead
of PPP.
Error #1950: Failed to push buffer to the reception queue of the dowloaded protocol driver
May indicate system software error. Consult product group.
Error #1951: Failed to get character(s) from the reception queue of the dowloaded protocol
driver
May indicate system software error. Consult product group.