Motorola 68P02958C00-B - Manual (Page 206)

DataTac Modem ID Table
5-149
Files of Type
This box shows the type (extension) of the files currently displayed in the File Name list. If the
displayed file type “filter” is not .rnc, open the drop-down list and select the .rnc type.
Save
The Save command stores the current Modem ID table.
If the file has not been saved at least once, Toolbox opens the Save As dialog box where you
assign a name to the Modem ID file. The name may contain up to 6 characters to ensure
backward compatibility.
If the file has been saved at least once, Toolbox just saves the file.
Save As
The Save As command saves the current Modem ID table under a different file name.
Generally, you’ll use this command when you want to create a Modem ID table file that is
slightly different from an existing one (load the existing file, save it under a new name, and
make the changes).
The command opens the dialog box shown below. This dialog also appears when you request
to save a Modem ID table file for the first time.
Dialog box parameters
Use the parameters in the order specified below. Normally you’ll only use the File Name
parameter.
Save In
If the currently displayed directory is not the correct one, double-click the drive letter at the
beginning of the Save In list and locate the drive/directory. To access sub-directories, double-
click parent directories.