Motorola 68P02958C00-B - Manual (Page 330)

Software Diagnostics Output
C-38
4. The number of times a break signal (end of reception) was received at the port.
RADIO CHANNEL (RAD1C , RAD2C,…)
## 300 LEVEL = 0
Radio hardware/software last status :-
Internal software data (key)
(DATA) : %% 1
Internal hardware registers (IREG) : %% 2
Internal hardware parameters (IRAM) : %% 3
Current channel port (CHAN_PORT) : %% 4
Channel status mode (CHAN_MODE) : %% 5
Channel driver lock (CHAN_LOCK) : %% 6
Channel signals (CHAN_SIGNAL): %% 7
Channel access type (CHAN_ACCESS): %%
Channel driver type (CHAN_TYPE) : %% 8
Channel control register (PBCNT) : %% 9
Channel direction register (PBDDR) : %% 10
Channel data register (PBDAT) : %% 11
Current reception empty buffers : %% 12
Current reception ready buffer : %% 13
Current transmission ready buffers : %% 14
Current transmission empty buffers : %% 15
1. Device-key address.
2. H-W registers address.
3. H-W parameters address.
4. Port number.
5. Configuration mode.
6. Channel access semaphore.
7. MTE signal on events that took place.
8. Whether FSK, DPSK or FSK.
9. Defines the functionality of port B in 68xxx (68000 family).
10. Determines whether the pin is for input or output.
11. Defines the value of the pin (previous parameter).
12. Number of empty Rx descriptors.
13. Number of busy Rx descriptors.
14. Number of busy Tx descriptors.
15. Number of empty Tx descriptors.