Motorola 68P02958C00-B User Manual
Page 443
Error Messages
C-151
Error #746:
Device TOPLC, Function %%, Port Name %% Received a control from the
SWITCHER while there is no software loaded for the PLC port. The received
f_buf (control) has been freed.
The RTU has to switch frames while the protocol is not loaded in the FLASH
memory.
Error #760:
Device TOSCADA, Function %% Port Name %% : Illegal Request from
application.
May indicate system software problem. Consult product group.
Error #761:
Device TOSCADA, Function %% Port Name %% : Unable To Unpack F-Buffer.
Unpack F-Buffer failed.
May indicate system software problem. Consult product group.
Error #762:
Device TOSCADA, Function %% Port Name %% : ERR_LOCK In TX Physical.
May indicate system software problem. Consult product group.
Error #763:
Device TOSCADA,Function %% Port Name %% : ERR_FULL In TX Physical.
May indicate system software problem. Consult product group.
Error #764:
Device TOSCADA, Function %% Port Name %% : Unable to Push a Block In F-
UF Buffer. Push block failed.
May indicate system software problem. Consult product group.
Error #765:
Device TOSCADA, Function %% Port Name %% : Unable To Alloc Uf Buffer.
Allocation of buffer failed.
Empty heap. Consult product group.
Error #766:
Device TOSCADA, Function %% Port Name %% : Unable To Unpack Uf Buffer.
Unpack Uf Buffer failed.
May indicate system software problem. Consult product group.
Error #767:
Device TOSCADA, Function %% Port Name %% : Unable To Alloc Buffer.
Allocation of buffer failed.
Empty heap. Consult product group.
Error #768:
Device TOSCADA, Function %% Port Name %% : The Port to SCADA is busy.
The port is busy.
Error #769:
Device TOSCADA, Function %% Port Name %% : The f_buf is missing !!
May indicate system software problem. Consult product group.