Motorola 68P02958C00-B - Manual (Page 199)

Host Table
5-142
File Menu
The commands in the File menu are designed to handle host/NTP Configuration files.
New
The New command opens a submenu and enables the user to create either a new host or NTP
Configuration file. If there is an open host/NTP file on the screen, it will be closed. (The user
will be prompted to save the file if changes were made.)
Open
The Open command opens an existing host/NTP file. When the Open command is executed,
the Toolbox displays the Open dialog box, as shown below.
The Open dialog box defaults to the config sub-directory of the Toolbox directory (e.g.,
c:\itbox550\config).
Select the host table/NTP file (see parameters below) and click OK to load it.
Dialog box parameters
Use the parameters in the order specified below. For host files, you will probably only use the
File Name parameter. For NTP files, you may have to change the Files of Type parameter.
Look In
If the currently displayed directory is not the correct one, double-click the drive letter at the
beginning of the Directories list and locate the directory. To access sub-directories, double-
click parent directories.
File Name
Type the name of the host/NTP file. Toolbox automatically adds the .hst extension. If the
desired file is an NTP file, select .hst under Files of Type. Alternatively, locate the file name in
the file list, and double-click the name.