Host, Host mac wake-up control and status register, Hmac_wucsr) – SMSC LAN9312 User Manual

Page 284: Host mac wake-up control, And status register (hmac_wucsr), Section 14.3.12, "host, Section 14.3.12

Advertising
background image

High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface

Datasheet

Revision 1.4 (08-19-08)

284

SMSC LAN9312

DATASHEET

14.3.12

Host MAC Wake-up Control and Status Register (HMAC_WUCSR)

This read/write register contains data and control settings pertaining to the Host MAC’s remote wake-
up status and capabilities. It is used in conjunction with the

Host MAC Wake-up Frame Filter Register

(HMAC_WUFF)

to fully configure the wake-up frame filter. Refer to

Section 9.5, "Wake-up Frame

Detection," on page 116

for additional information.

Offset:

Ch

Size:

32 bits

BITS

DESCRIPTION

TYPE

DEFAULT

31:10

RESERVED

RO

-

9

Global Unicast Enable (GUE)
When set, the Host MAC wakes up from power-saving mode on receipt of
a global unicast frame. This is accomplished by enabling global unicasts as
a wakeup frame qualifier. A global unicast frame has the MAC Address [0]
bits set to 0.

R/W

0b

8:7

RESERVED

RO

-

6

Remote Wake-Up Frame Received (WUFR)
The Host MAC sets this bit upon receiving a valid Remote Wake-up frame.

R/WC

0b

5

Magic Packet Received (MPR)
The Host MAC sets this bit upon receiving a valid Magic Packet

R/WC

0b

4-3

RESERVED

RO

-

2

Wake-Up Frame enabled (WUEN)
When set, Remote Wake-Up mode is enabled and the Host MAC is capable
of detecting wake-up frames as programmed in the

Host MAC Wake-up

Frame Filter Register (HMAC_WUFF)

.

R/W

0b

1

Magic Packet Enable (MPEN)
When set, Magic Packet Wake-up mode is enabled.

R/W

0b

0

RESERVED

RO

-

Advertising