SMSC LAN9312 - Manual (Page 402)

High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface
Datasheet
Revision 1.4 (08-19-08) 402 SMSC LAN9312
DATASHEET
14.5.3.33 Switch Engine Port 0 Ingress VLAN Priority Regeneration Table Register
(SWE_INGRSS_REGEN_TBL_MII)
This register provides the ability to map the received VLAN priority to a regenerated priority. The
regenerated priority is used in determining the output priority queue. By default, the regenerated priority
is identical to the received priority.
Register #: 1855h Size: 32 bits
BITS DESCRIPTION TYPE DEFAULT
31:24 RESERVED RO -
23:21 Regen7
These bits specify the regenerated priority for received priority 7. R/W 7h
20:18 Regen6
These bits specify the regenerated priority for received priority 6. R/W 6h
17:15 Regen5
These bits specify the regenerated priority for received priority 5. R/W 5h
14:12 Regen4
These bits specify the regenerated priority for received priority 4. R/W 4h
11:9 Regen3
These bits specify the regenerated priority for received priority 3. R/W 3h
8:6 Regen2
These bits specify the regenerated priority for received priority 2. R/W 2h
5:3 Regen1
These bits specify the regenerated priority for received priority 1. R/W 1h
2:0 Regen0
These bits specify the regenerated priority for received priority 0. R/W 0h