13 saw-tooth wave (immode = 1) – Samsung S3F401F User Manual
Page 100
Advertising
S3F401F_UM_REV1.00
INVERTER MOTOR CONTROLLER (IMC)
6-21
4.13 SAW-TOOTH WAVE (IMMODE = 1)
PWMSWAP = 0, PWMPOLU = 1 (High start), PWMPOLD = 0 (Low start)
TOPCMP
PCCMPR
PBCMPR
PACMPR
ADCCMPR0
PWMxU0
PWMxU1
PWMxU2
PWMxD0
PWMxD1
PWMxD2
Interrupt
(Can be used by ADC
trigger signal)
ADCCMPR1
ADCCMPR2
NOTES:
1. Switches of up side and down side are low active.
2. For 100% duty of upside, the rising/falling compare register must be set to ‘0’. For 0% duty of upside, the rising compare
register must be greater than TOPCMP value.
Advertising