Samsung S3F401F - Manual (Page 92)

S3F401F_UM_REV1.00 INVERTER MOTOR CONTROLLER (IMC)
6-13
4.6 TRI-ANGULAR WAVE (IMMODE = 0)
PWMSWAP = 1, PWMPOLU = 1 (High start), PWMPOLD = 0 (Low start)
TOPCMP
PCCMPF
PCCMPR
PBCMPF
PBCMPR
PACMPR
PACMPF
ADCCMPR0
PWMxU0
PWMxU1
PWMxU2
PWMxD0
PWMxD1
PWMxD2
Interrupt
(Can be used by ADC
trigger signal)
ADCCMPF0
ADCCMPF1
ADCCMPR1
ADCCMPF2
ADCCMPR2
NOTES:
1. Switches of up side and down side are low active.
2. For 0% duty of upside, the rising/falling compare register must be set to ‘0’. For 100% duty of upside, the rising compare
register must be greater than TOPCMP value.