Samsung S3F401F User Manual
Page 115
Advertising
INVERTER MOTOR CONTROLLER (IMC)
S3F401F_UM_REV1.00
6-36
ADC Start Signal Select Register (Continued)
ADCSTARETSEL (0x00C) Access: Read/Write
ADCCMPF2SEL
Enable ADC Start Trigger Signal by ADCCMPF2 Match
0 = Not selected
1 = Selected
NOTE1
ADC conversion must not be overlapped by setting appropriate value to each compare register.
NOTE2
The setting of this register bit doesn’t affect interrupt generation
NOTE3
When IMC is in a saw-tooth wave mode, the values of ADCCMPF0SEL, ADCCMPF1SEL and ADC
MPF2SEL bit do not effect in operation.
Advertising