Samsung S3F401F - Manual (Page 98)

S3F401F_UM_REV1.00 INVERTER MOTOR CONTROLLER (IMC)
6-19
4.11 SAW-TOOTH WAVE (IMMODE = 1)
PWMSWAP = 0, PWMPOLU = 0 (Low start), PWMPOLD = 0 (Low start)
TOPCMP
PCCMPR
PBCMPR
PACMPR
ADCCMPR0
PWMxU0
PWMxU1
PWMxU2
PWMxD0
PWMxD1
PWMxD2
Interrupt
(Can be used by ADC
trigger signal)
ADCCMPR1
ADCCMPR2
NOTES:
1. Switch of up side is high active and switch of down side is low active.
2
For 100% duty of upside, the rising/falling compare register must be set to ‘0’. For 0% duty of upside, the rising compare
register must be greater than TOPCMP value.