Nortel Networks NN43001-106 - Manual (Page 102)

102 2 Mbps Digital Trunk Interface Enhancements
• The overload process is able to recognize the channel causing the
overload when the case arises.
Operating parameters
There are no operating parameters associated with this feature.
Feature interactions
There are no feature interactions associated with this feature.
Feature packaging
There are no specific packaging requirements associated with this feature.
Feature implementation
Note: LD 73 is modified to allow the implementation of the CNET
enhancement for trunks entering an alarm state and trunk cards exiting
an alarm state. The enhancement is implemented by responding YES to
the new FRFW prompt in LD 73.
LD 73 - Implement the system hardware and software parameters.
Prompt Response Description
REQ NEW CHG Add, or change
TYPE DTI2 2.0 Mbps DTI.
GP2 T2 mt dt ct ot Group 2 error thresholds.
FRFW (NO) YES French Firmware.
Enter YES to enable the CNET enhancement for trunks
entering an alarm state processing capabilities. Requires that
QPC915 packs be equipped.
Enter YES to enable the CNET enhancement for trunk cards
exiting an alarm state processing. Requires that QPC915
packs be equipped.
Enter NO if the CNET enhancement for trunks entering an
alarm state processing capabilities are not required.
Enter NO if the CNET enhancement for trunk cards exiting an
alarm state processing is not required.
Default is NO.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.