Nortel Networks NN43001-106 - Manual (Page 452)

452 Automatic Set Relocation
4 Enter the four-digit code to identify your telephone. A tone confirms
the telephone is ready to be moved.
5 Unplug the telephone and install it at the new location.
6 Wait 30 seconds after plugging the telephone into the new location,
lift the handset, and dial the four-digit identifier. A tone confirms the
telephone has been moved successfully.
—End—
Modular Telephone Relocation
To relocate a telephone using Modular Telephone Relocation:
Step Action
1 Lift the handset or activate handsfree.
2 Enter the relocation code (either SPRE 81 or the Flexible Feature
Code).
3 Enter the security code. The default is 0000.
4 A two-second tone burst confirms that the telephone is relocated out.
5 Unplug the telephone and install it at the new location.
6 The confirmation buzz through the telephone’s loudspeaker
indicates the telephone is in service.
—End—
All calls associated with the telephone receive force disconnect while it
is relocated out. The telephone information automatically moves to the
relocation table.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.