Nortel Networks NN43001-106 - Manual (Page 168)

168 Access Restrictions
Prompt Response Description
TYPE PARM System Parameters.
...
FRPT (NEFR) OLFR (Deny) allow incoming trunk calls to telephones with FRE CLS,
using call modification.
LD 16 - Add or change the TARG code for a trunk route.
Prompt Response Description
REQ CHG Change.
TYPE RDB Route data block.
CUST xx Customer number, as defined in LD 15
ROUT Route number of COT or FX
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
There can be only one Code Restriction Block for each COT or
FX route.
CLR ALOW Allow all NPA/NXX codes except those entered in response to
the prompt DENY.
DENY Deny all NPA/NXX codes except those entered in response
to the prompt ALOW.
<CR> Used when REQ = CHG.
ALOW xxx xxx... If CLR = DENY, enter the NPA/NXX codes (200-999) allowed.
DENY xxx xxx... If CLR = ALOW, enter the NPA/NXX codes (200-999) denied.
LD 19 - Implement Code Restriction on trunk routes.
Prompt Response Description
REQ CHG Change.
TYPE CRB Code Restriction Block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.