Feature interactions, Ac15 recall: transfer from meridian 1, Automatic redial – Nortel Networks NN43001-106 User Manual

Page 373

Advertising
background image

Feature interactions

373

Authorization Code Conditionally Last is not supported by the Autodial
feature.

An octothorpe (#) is required as a delimiter after the Authorization Code if
an ESN access code and dialed number is stored as part of the Autodial
key. If the octothorpe is not entered, the user receives fast busy tone. The
octothorpe is not stored in the CDR record.

The Autodial feature allows a maximum of 23 digits including the SPRE
code, the digit 6, the Authorization Code, the delimiter (#), the ESN access
code, and the dialed number.

If the system initializes before the Authorization Code is recorded by CDR,
the record will be lost.

A Meridian 1 proprietary digit display telephone can display up to 16 digits.
Additional digits cause the digits to scroll off the display.

On digit display telephones, Authorization Codes cannot be blocked from
being displayed.

The Authorization Code is not validated during the storing process. An
invalid Authorization Code is detected when the Autodial key is activated.

Network Automatic Route Selection (NARS) and Basic Alternate Route
Selection (BARS) does not support the asterisk (*) as a pause when dialing
an autodial number.

Feature interactions

AC15 Recall: Transfer from Meridian 1

Autodial and Last Number Redial are supported with the AC15 Recall:
Transfer from Meridian 1 on the first transfer, provided that the digits are
outpulsed on the trunk after the End-to-End Signaling Delay timer expires.
If the far end is not ready, the call will fail because no dial tone detection
is performed by the system.

Additional transfers are supported if the stored digits are outpulsed without
any treatment. For example, a route is seized and the route access code
is outpulsed to the far end and interpreted as a Directory Number. No dial
tone detector or timer is started, so the digits are outpulsed immediately
without checking the state at the far end.

Automatic Redial

Automatic Redial can be activated on a dialed number using the Autodial
(ADL) key.

Nortel Communication Server 1000

Features and Services - Book 1 of 6 (A to B)

NN43001-106

01.04

Standard

Release 5.0

27 July 2007

Copyright © 2007, Nortel Networks

.

Advertising