Nortel Networks NN43001-106 - Manual (Page 89)

Operating parameters 89
• speed call user
• store number (erase)
• store number (redial)
• store number (save)
• system speed call user
• trunk answer from any station
• terminal diagnostics
• trunk verification, and
• user status.
The following functions can be accessed using the new (A, B, C, D, * and #)
keys while in the post-dial mode (when it receives special dial tone after a
recall during an active call, or after a busy DN has been dialed):
• Call Detail Recording charge account
• call park
• Conference six trunk disconnect
• ICI override
• last number redial
• Malicious Call Trace
• override
• permanent hold
• radio paging initiate (parallel)
• radio paging initiate (serial)
• ring again activation
• speed call user
• store number (redial)
• store number (save), and
• system speed call user.
Operating parameters
All Digitone Receivers (DTRs) on the system must have the correct strap
settings for full 16-button DTMF detection.
An ABCD table must be defined, and associated with a station group.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.