Nortel Networks NN43001-106 - Manual (Page 448)

448 Automatic Set Relocation
CSC011 x y
x = old TN (l s c u) for the telephone
y = new TN (l s c u) for the telephone
The following message appears again for each changed TN:
SCH5524 DN nnnn NEW MARP l s c u
nnnn = the DN associated with the MARP TN
l s c u = the new MARP TN assigned to DN nnnn
Night Key for Direct Inward Dialing Digit Manipulation
Delete the DRC key from a telephone before performing Automatic Set
Relocation. If this is not done, the DRC lamp is activated on the wrong
telephone.
Power Fail Transfer
Since Power Fail Transfer is hardwired to certain Terminal Numbers, this
feature is not maintained by a telephone when it is relocated.
Feature packaging
Automatic Set Relocation (ASR) package 53 has no feature package
dependencies.
Modular Telephone Relocation requires the following:
• Automatic Set Relocation (ASR) package 53
• Meridian Modular Terminals (ARIE) package 170
• Digital telephones (DSET) package 88
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. LD 15 – Assign the Automatic Set Relocation security code.
2. LD 10 – Enable/disable line circuits for Automatic Set Relocation.
3. LD 11 – Enable/disable line circuits for Automatic Set Relocation.
4. LD 12 – Gather data for each line circuit to be used as a supplementary
power source.
5. LD 17 – Allow ASR messages to be printed at a system terminal or
stored in the History File.
6. LD 17 – Allow Automatic Set Relocation messages to be printed at a
system terminal or stored in the
7. LD 32 – Query information
8. LD 50 – Remove an entry in the relocation table.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.