Nortel Networks NN43001-106 - Manual (Page 426)

426 Automatic Number Identification
Prompt Response Description
SIGL BEL
NT4
NT5 Bell method signaling.
ITT-North NT400 signaling (only if TKTP = CAM).
ITT-North NT500 signaling (only if TKTP = CAM).
FORM M1A
M2B
M3C For BEL, NT4, or NT5 (NT4 and NT5 not applicable if TKTP =
CAA).
For BEL, NT4, or NT5 (NT4 and NT5 not applicable if TKTP =
CAA).
For NT5 (only if TKTP = CAM).
ICOG OGT Outgoing.
ACOD xxxx Access Code.
ID 0-9 Identification digit for CAMA routes (for BEL).
CAT 00-99 Category digits for CAMA routes (only if TKTP = CAM). For
NT4 and NT5.
STRK (NO) YES (Disable) enable super trunk group feature (Bell method
signaling only).
SPTO (NO) YES 7- to 10-digit, or 3-digit outpulsing for ANI calls.
ANKP (NO) YES (Do not) suppress KP signal on ANI calls.
CNTL (NO) YES (Do not) allow changes to timers.
- TIMR ATO 128–65,408 ANI timeout timer in milliseconds (default is 4,992).
- ANDT (NO) YES (Do not) provide ANI dial tone.
LD 14 - Configure the Centralized Automatic Message Accounting (CAMA) trunk data.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE CAM
CAA CAMA trunk.
CAMA-ANI trunk (SIGL = BEL in LD 16).
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B where
c = card and u = unit.
XTRK XUT
XEM
EXUT Extended Universal Trunk card.
Extended E & M trunk card.
Enhanced Extended Universal Trunk.
...
CUST xx Customer number, as defined in LD 15
...
RTMB Route number and Member Number
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.