Nortel Networks NN43001-106 - Manual (Page 509)

509
Bandwidth Management Support for
Network Wide Virtual Office
Contents
This section contains information on the following topics:
• Section "Feature description" (page 509)
• Section "Operating parameters" (page 510)
• Section "Feature interactions" (page 510)
• Section "Feature packaging" (page 511)
• Section "Feature implementation" (page 511)
• Section "Feature operation" (page 513)
Feature description
Bandwidth Management Support for Network Wide Virtual Office (NWVO)
allows the assignment of the same Virtual Private Network Identifier, VPNI,
to all Call Servers in a network, such that the entire network can be identified
by one VPNI number. It allows the assignment of the same Bandwidth
Zone number to different Call Servers and to have an INTRAZONE policy
between them. At the same time this feature does not interfere with
the existing functionality of the Bandwidth Management (BWM) feature,
because previous bandwidth configuration rules are still supported. This
feature extends the meaning of the Virtual Private Network Identifier (VPNI).
In previous releases, VPNI was used to identify one customer system
(Main Office (MO) switch + Branch Office (BO) switches connected to this
MO switch). In release 5.0, a VPNI number identifies the whole customer
network that includes all MO and BO switches.
This feature introduces a new Current Zone field for the IP sets to
distinguish between the Bandwidth Zone number configured for the IP set
and the current, real, zone number that is not configurable, but is changed
dynamically by Virtual Office feature operation. The Current Zone field is
used in the bandwidth calculation routines instead of the Configured Zone
field to have correct bandwidth calculation in case of NWVO call scenarios.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.