Nortel Networks NN43001-106 - Manual (Page 497)

Feature implementation 497
Feature implementation
The loss level tables are configured in LD 97. The craftsperson must have
an authorized password to configure the loss tables, but printing of the
tables can be performed without the password.
LD 97 - Configure a loss plan table.
Prompt Response Description
TYPE LOSP The type branch for the system loss plan table.
STYP (PRED) CSTM
DISL The type of B34 static loss plan table to be used to
download B34 programmable loss codes. Enter PRED if a
numbered pre-defined static loss plan is to be used. Enter
CSTM to customize an existing static loss plan table by
modifying one or more existing entries, or to create a new
table by entering new values to all entries. Enter DISL to
disable static loss plan downloading.
PWD2 xxxx Enter the level 2 administrator password. Note that this
is prompted only when STYP=DISL or STYP=CSTM.
If STYP=DISL, and the proper password is entered,
then the next prompt is REQ. If STYP=CSTM, and the
proper password is entered, then the next prompts are
the PORTTYPES (for example, COTS, COTL). If the
password entered is incorrect, an existing error message,
SCH523, SCH525, SCH526 will be issued and PWD2
will be re-prompted.
TNUM 1-25 Prompted only if PRED was entered in response to the
STYP prompt above. Enter the number for the required
pre-defined static loss plan.
COTS Rx Tx Prompted only if the response to the STYP prompt above
was CSTM. COT short line. Enter the coded input/output
relative levels in the receive (Rx) direction and in the
transmit (Tx) direction, for this port type. The input range
of Rx and Tx for port types associated with trunks is 8-39
and 0-31 respectively; the input range of Rx and Tx for
port types associated with analog lines is 0-31 and 8-39
respectively.
COTL Rx Tx COT long line. The same definition applies as for COTS.
DIDS Rx Tx DID/DOD short line. The same definition applies as for
COTS.
DIDL Rx Tx DID/DOD long line. The same definition applies as for
COTS.
T2WT Rx Tx TIE, 2 wire, Class of Service TRC. The same definition
applies as for COTS.
T2WN Rx Tx TIE, 2 wire, Class of Service NTC. The same definition
applies as for COTS.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.