Nortel Networks NN43001-106 - Manual (Page 378)

378 Autodial
Prompt Response Description
...
- ADLD (0)-20 Autodial Delay, in seconds.
If 0, then FFC Autodial for 500/2500 telephones is disabled.
Only prompted if FFC package (139) is equipped. Inputs are
rounded up to the next valid increment of two (that is, input of
11 would be rounded up to 12).
Feature operation
To program Autodial, follow these steps:
Step Action
1 While the handset is on hook, press the Autodial key.
The associated lamp flashes.
2 Dial the desired number and press the Autodial key again.
The lamp goes dark.
—End—
To use Autodial, follow these steps:
Step Action
1 Lift the handset off hook, or press the Handsfree key if allowed.
2 Press the Autodial key.
The call is dialed.
—End—
The following instructions are for using the Autodial FFCs:
• Activate and program
The user must dial the Autodial Activate (ATDA) FFC followed by the
number to be stored as the Autodial number.
• Activate only
The user must dial the Autodial Activate (ATDA) FFC.
• Deactivate
The user must dial the Autodial Deactivate (ATDD) FFC or the
Deactivate (DEAF) FFC.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.