Nortel Networks NN43001-106 - Manual (Page 372)

372 Autodial
Speed Call/Autodial with Authorization Code. This enhancement allows
an Authorization Code to be included in a Speed Call entry or an Autodial
key. Entries can contain any one of the following combinations:
• SPRE code + digit 6 + authorization code
• SPRE code + digit 6 + authorization code + #, or
• SPRE code + digit 6 + authorization code + # + Electronic Switched
Network (ESN) access code and dialed number.
Autodial Flexible Feature Codes
A user can define an Autodial DN that is automatically dialed by the system
in one of two ways:
• In LD 10, while defining the Autodial DN length under the feature (FTR)
ADL.
• Using the Autodial Activate (ATDA) FFC, defined in LD 57. This method
requires that the length of the Autodial must first be defined in LD 10.
The user goes off hook and dials the ATDA FFC. Upon receiving dial
tone, the user enters the desired Autodial DN, and then goes on hook.
If, after going off hook, no digits are entered within a customer-defined
period of time (defined in LD 15) under ADLD (Autodial Delay), the Autodial
DN is automatically dialed.
In LD 10, the user can define a partial DN as an Autodial DN. The user can
enter the remaining digits while making a call – the user goes off hook,
waits for the dial tone to time out, and then enters the remaining digits of the
desired DN. The call is then dialed out.
To deactivate Autodial, the user dials either the Autodial Deactivate (ATDD)
FFC (defined in LD 57) or the general Deactivate (DEAF) FFC (also defined
in LD 57).
Operating parameters
Autodial must be assigned to a key/lamp pair. As a result, it is not available
on analog (500/2500 type) telephones.
To use Autodial, the Autodial Activate (ATDA) FFC must have been entered
previously and an Autodial number must be stored.
An attendant can enter an Authorization Code for other callers provided
that the system is equipped with the Network Authorization Code (NAUT)
package.
On attendant consoles, pressing the Autodial key, then pressing a Speed
Call key is not allowed.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.