Nortel Networks NN43001-106 - Manual (Page 429)

429
Automatic Number Identification on DTI
Contents
This section contains information on the following topics:
"Feature description" (page 429)
"Operating parameters" (page 429)
"Feature interactions" (page 430)
"Feature packaging" (page 430)
"Feature implementation" (page 430)
"Feature operation" (page 430)
Feature description
Automatic Number Identification (ANI) on Digital Trunk Interface (DTI)
extends the ANI feature to digital Central Office (DCO) and Digital Toll Office
(DTO) trunks. In addition, the ANI capability is extended to Primary Rate
Access (PRA) trunk routes through the Primary Rate Interface.
For further information, refer to the Automatic Number Identification feature
module in this guide.
Operating parameters
The QPC189F or NT817 (all vintages) are required to support this feature.
DTI interfaces externally with a digital trunk carrier facility at the DS-1 rate.
MF signals pass across this interface in a digitally encoded format.
Supervisory signaling through DTI is accomplished by A&B bit signaling.
A&B bit signaling can emulate E&M or loop signaling.
Address (called number) signaling through DTI can be dial pulse or MF.
Immediate start or wink start may be used.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.