Nortel Networks NN43001-106 - Manual (Page 114)

114 500 Telephone Features
Feature interactions
2500 telephone features
When Special Service for 2500 Sets (SS25) package 18 is equipped, 2500
telephones also access the above listed features by dialing the SPRE and a
two-digit access code.
Feature packaging
500 Set Dial Access to Features (SS5) package 73 requires Special Service
for 2500 Sets (SS25) package 18.
Feature implementation
LD 10 - Enable 500 type telephone features.
Prompt Response Description
REQ: CHG Change.
TYPE: 500 Telephone type.
TN Terminal Number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System, Media Gateway 1000B, and Media
Gateway 1000T, where c = card and u = unit.
CLS (XFD) XFA (Deny) allow transfer.
FTR CFW xx Call Forward All Calls and DN length (4-23).
Enter X CFW to remove.
SCC xxxx Speed Call Controller and list number.
Enter X SCC to remove.
SCU xxxx Speed Call User and list number.
Enter X SCU to remove.
SSU xxxx System Speed Call User and list number.
Enter X SSU to remove.
PHD Allow Permanent Hold.
Enter X PHD to remove.
Feature operation
Call Forward All Calls
To forward your calls, follow these steps:
Step Action
1 Lift the handset and dial SPRE + 74. You hear dial tone.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.