Nortel Networks NN43001-106 - Manual (Page 432)

432 Automatic Preselection of Prime Directory Number
Feature packaging
This feature is included in base system software.
Feature implementation
LD 11 - Assign PDN to key 0 on proprietary telephone.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: a...a Telephone type. Type ? for a list of possible responses.
...
CLS CLS Class of Service options
(PDN) Primary Directory Number
...
KEY xx aaa yyyy
(cccc or D) zz..z Telephone function key assignments
The following key assignments determine calling options and
features available to a telephone. Note that KEY is prompted
until just a carriage return <cr> is entered.
where
xx = key number 0
aaa = SCR, Single Call Ringing
yyyy = PDN, Primary Directory Number
zz..z = additional information required for the key aaa.
The cccc or D entry deals specifically with the Calling Line
identification feature. Where:
cccc = CLID table entry of (0)-N, where N = the value entered
at the SIZE prompt in LD 15 minus 1.
D = the character "D". When the character "D" is entered, the
system searches the DN keys from key 0 and up, to find a DN
key with CLID table entry. The CLID associated with the found
DN key will then be used.
Feature operation
With this feature enabled, lifting the handset automatically selects the DN
assigned to key zero to receive dial tone or answer an incoming call on
that key.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.