Nortel Networks NN43001-106 - Manual (Page 200)

200 Attendant Administration
Phantom Terminal Numbers (TNs)
The Attendant Administration feature does not support Phantom TNs.
Phantom DNs cannot be configured on a non-phantom TN.
Remote Call Forward
Attendant Administration does not support the telephone programming
associated with Remote Call Forward.
Speed Call, System
System Speed Call lists can be assigned using Attendant Administration.
Feature Packaging
Attendant Administration (AA) package 54 requires Attendant Overflow
Position (AOP) package 56.
Feature Implementation
Task summary list
The following is a summary of the tasks in this section:
• "LD 15 – Assign an Attendant Administration access code." (page 188)
• "LD 12 – Add or change Attendant Administration key." (page 189)
Table 5
LD 15 - Assign an Attendant Administration access code.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: PWD Customer related passwords
CUST: Customer number
0-99 Range for Large System and CS 1000E System.
0-31 Range for Small Systems and Media Gateway 1000B.
- ATAC xxxx New or changed Attendant Administration access code
(maximum four digits).
X preceding the access code removes it.
- - PWD2 xxxx This password is programmed in LD 17 at the PWD2 prompt.
Table 6
LD 12 - Add or change Attendant Administration key.
Prompt Response Description
REQ NEW Add new data. Change existing data.
CHG
TYPE 2250 Attendant console type.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.