Nortel Networks NN43001-106 - Manual (Page 150)

150 AC15 Recall: Transfer from Norstar
Prompt Response Description
DLTN YES Dialtone provided by the system to the far-end switch.
TRRL YES AC15 Recall: Transfer from Norstar. An AC15 trunk on this
route is able to receive a recall signal. Prompted with ACRL
package 236 if TKTP = TIE, and DTRK = NO.
LD 14 - Define an AC15 TIE trunk.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE TIE TIE trunk.
TN Terminal number
l s c u Format for Large System and CS 1000E system, where l =
loop, s = shelf, c = card, u = unit.
c u Format for Small System, Media Gateway 1000B, and Media
Gateway 1000T, where c = card and u = unit.
XTRK XFEM XFEM card.
RTMB Route number and Member Number
0-511 1-4000 Range for Large System and CS 1000E system.
0-127 1-4000 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
SIGL WR4 AC15 signaling.
SUPN YES Answer and disconnect supervision.
CLS DTN Digitone Class of Service.
Feature operation
Initiate a consultation
A call is established between Party X (a telephone or trunk) on the system
and Party Z on Norstar, through an AC15 trunk. When Party Z initiates a
consultation call (Norstar sends a recall signal), Party X is placed on hold
and dialtone is provided to Norstar using the same AC15 trunk. The digits
received from Norstar are processed according to the system’s dialing plan,
and eventually Party Y (a telephone, trunk, or attendant console) rings. If
no digits are received from Norstar for 14 seconds while Z hears dialtone,
overflow tone (for 14 seconds), and then silence (indefinitely) are provided
to Party Z. At any time, Norstar may then send another recall signal to be
reconnected to Party X.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.