Nortel Networks NN43001-106 - Manual (Page 95)

Feature implementation 95
Prompt Response Description
PDCA (1)-16 Pad Category table number.
The PAD category must already be defined in LD 73.
Default is 16 if loop type = JDMI.
PCML MU A Indicate whether Mu-law or A-law Pulse Code Modulation
(PCM) for voice calls is active in the channel.
Not prompted for JDMI loops.
LD 16 - Create or modify DTI2 trunk route data blocks.
Prompt Response Description
REQ NEW CHG Add, or change.
TYPE a...a Route type.
DTRK (NO) YES Digital trunk route.
DGTP Digital trunk type.
(DTI)
PRI
DTI2
PRI2
JDMI 1.5 Mbps DTI (default).
1.5 Mbps Primary Rate Interface.
2 Mbps DTI.
2 Mbps Primary Rate Interface.
Japanese Digital Multiplex Interface.
Prompted when the DTI2 or PRI2 package is equipped.
LD 17 - Modify the system hardware and software parameters to enable or disable the feature.
Prompt Response Description
REQ NEW CHG Add, or change.
TYPE CEQU Common Equipment Parameters.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.