GE Industrial Solutions ASTAT BP - Manual (Page 13)

ASTAT BP User Manual
13 GE Industrial Solutions ©2013 GE Company All Rights Reserved
33..22 Weight
Model Weight
Kg Lbs
QBx0008xxxxx 3 6.6
QBx0017xxxxx 3 6.6
QBx0031xxxxx 3 6.6
QBx0044xxxxx 3 6.6
QBx0058xxxxx 5.2 11.4
QBx0072xxxxx 5.2 11.4
QBx0085xxxxx 8.5 18.7
QBx0105xxxxx 8.5 18.7
QBx0145xxxxx 12.5 27.6
QBx0170xxxxx 12.5 27.6
QBx0210xxxxx 37 81.6
QBx0240xxxxx 37 81.6
QBx0310xxxxx 37 81.6
QBx0360xxxxx 38 83.8
QBx0414xxxxx 38 83.8
QBx0477xxxxx 38 83.8
QBx0515xxxxx 42.2 93
QBx0590xxxxx 50.6 111.5
QBx0720xxxxx 54 119
QBx0840xxxxx 54 119
QBx0960xxxxx 75.5 166.4
QBx1100xxxxx 75.5 166.4
33..33 I/O Terminal Board Specifications
Refer to drawing on page 16.
Terminal Function Description
1L1, 3L2, 5L3 Connection to mains voltage up to
600V
Thyristor’s PIV rating, internal circuitry and insulation defines three
voltage levels:
QB 1 x : for 208-400V +10%/ -15% 50/60Hz
QB 2 x: for 440-600V +10% /-15% 50/60Hz
Each ASTAT-BP is suitable for one of the above levels & for 50/60 Hz.
2T1, 4T2, 6T3 Connection to motor Connect motor’s terminals to these terminals/busbars.
G Connection to ground For proper operation and for safety reasons soft ASTAT-BP must be
properly grounded.
Terminal A1 Control phase The control voltage operates the electronic circuitry and the fans
(when they exist).
Terminal A2 Control neutral (return) Two control voltages are available:
QB x xxxx 1 x x S for 110V +10%/-15% 50/60Hz
QB x xxxx 2 x x S for 230V +10%/-15% 50/60Hz