GE Industrial Solutions ASTAT BP - Manual (Page 25)

ASTAT BP User Manual
25 GE Industrial Solutions ©2013 GE Company All Rights Reserved
4.7.1 Display Mode
10
– Page 0
11
Function &
Default
Unit Description
Motor Current
I<0.1 Ir
A Displays operating current of the motor.
ASTAT-BP’s Default Display. After pressing the Mode or Select keys, a time
delay is initiated. Following the delay the LCD returns to display Motor
Current.
If current is lower than 0.1 of the Starter Current, the display will show:
I < 0.1 Ir.
Line Voltage
0 Volt
V Displays the mains voltage.
Thermistor Input
3.1 Kohm
Kohm Displays the resistance level of the motor’s thermistor.
Option PCB
Not Installed
Displays which optional PCBs in installed in the ASTAT-BP.
POWER
30kW
kW Displays the active power drawn by the motor.
POWER FACTOR
0.9
Displays the power factor of the energy drawn by the motor.
10
Displays in MINIMIZED MODE and MAXIMIZED MODE.
11
Parameters cannot be programmed in page 0.