Rockwell Automation 1734-IE4S POINT Guard I/O Safety Modules User Manual - Manual (Page 114)

114 Rockwell Automation Publication 1734-UM013J-EN-P - July 2014
Chapter 6 Configure the Module for a SmartGuard Controller
3. Click Apply and OK to return to the main RSNetWorx for DeviceNet
dialog box.
Configure Safety Analog Inputs
Follow these steps to configure a 1734-IE4S module.
1. Double-click the POINT Guard I/O analog module to open the
Properties dialog box.
2. Click the Safety Configuration tab.