Cub Cadet I-Beam Style - Manual (Page 108)

3-89
3
10.Grasp the 33T wheel shaft assembly and 10T
wheel input sprocket assembly and raise both
until the 10T wheel input sprocket assembly
comes free. See Figure 3-265.
11.Pivot the 10T wheel input sprocket assembly
and #50 chain away from the wheel reduction
jack shaft.
12.Inspect the 10T wheel input sprocket assembly
for damage or wear.
13.Remove and inspect the 33T wheel shaft
assembly. See Figure 3-266.
14.Inspect the weld securing the 33T gear to the
wheel shaft assembly to make certain it is not
broken or defective.
15.Assemble in the reverse order above.
Tillers.fm Page 89 Tuesday, February 19, 2002 1:28 PM