Cub Cadet I-Beam Style - Manual (Page 177)

5-38
5-7.6 Gear Case Lubrication. The gear case is
lubricated with 4 ounces Shell Alvania grease
EPR00 (order part number 737-0168). See
Figure 5-65.
5-7.7 Auger Mounting Bolts. Augers are attached
with special bolts as follows:
1. The augers are secured to spiral shaft with two
hex bolts and hex lock nuts. If you hit a foreign
object or ice jam, the snow thrower is designed
so that the hex bolts will shear. See Figure 5-
66.
2. If augers will not turn, check to see if hex bolts
have sheared. Two replacement hex bolts and
hex lock nuts have been provided with the
snow thrower. For future use, order part num-
ber 710-0891 (hex bolt 5/16-18 x 1.75 inch
long) and 712-0429 (hex insert lock nut 5/16-
18 thread).
5-7.8 Differential. The differential is sealed at the
factory and does not require checking. If disas-
sembled for any reason, lubricate with 3/4
ounce of Plastilube #0. Order part number
737-0166. See Figure 5-67.
NOTE
The differential assembly can be serviced as a
complete assembly (717-0306).
SNOW THROWER.fm Page 38 Wednesday, February 20, 2002 10:28 AM