Cub Cadet I-Beam Style - Manual (Page 164)

5-25
5
5-4. SNOW THROWERS MODELS 552 AND 588
(See Figure 5-35).
5-4.1 Drive clutch adjustment. Refer to Models 440
and 450 in paragraph 5-3.3.
5-4.2 Auger clutch adjustment. Refer to Models 440
and 450 in paragraph 5-3.4.
5-4.3 Shift rod adjustment. Refer to Models 440 and
450 in paragraph 5-3.2.
5-4.4 Belt removal and replacement. Refer to Mod-
els 440 and 450 in paragraph 5-3.8.
5-4.5 Track Chain Replacement.
1. Block up frame of the unit so tracks are off the
ground.
2. Loosen hex nut on track adjusters. Move track
adjusters so that all tension is removed.
3. Roll track off. See Figure 5-36.
4. Remove chain by disconnecting master link.
See Figure 5-37.
5. Reassemble in reverse order with new chain.
When reassembling track, be certain the
thread on the track is assembled in the proper
direction. See Figure 5-38.
SNOW THROWER.fm Page 25 Wednesday, February 20, 2002 10:28 AM