Cub Cadet I-Beam Style User Manual
Page 4
Advertising
1-3
1
1.
Remove the nuts from the four carriage bolts
that hold the deflector to the trimmer base
using a 7/16" wrench. See Figure 1-7.
2.
Rotate the deflector so that the wide part of
the center hole in the deflector will fit past the
spindle. See Figure 1-8.
3.
Remove the deflector. See Figure 1-9.
Figure 1-9.
4.
Remove the belt keeper from the idler pulley
by loosening the lock nut with a 1/2" wrench.
See Figure 1-10.
Figure 1-10.
01 String Trimmers.fm Page 3 Tuesday, February 19, 2002 1:05 PM
Advertising