Cub Cadet I-Beam Style User Manual
Page 67
Advertising
3-48
12.Remove handle by removing handle adjust-
ment crank and two belleville washers, hex nut
and hex bolt. See Figures 3-124 and 3-125.
13.Remove depth bar, by removing clevis pin and
hairpin cotter. See Figure 3-126.
14.Remove handle pivot and positioner bracket as
one assembly by removing four hex bolts, lock
washers and hex nuts. See Figure 3-127.
15.Remove tine shield by removing two hex bolts,
lock washers and hex nuts at the back of tine
shield. See Figure 3-128.
Tillers.fm Page 48 Tuesday, February 19, 2002 1:28 PM
Advertising