Cub Cadet I-Beam Style User Manual
Page 276
Advertising
6-77
6
5. Remove the relief valve spring and steel ball
from the control valve body using a small mag-
net.
NOTE
Make certain the spring is installed cupped
side towards the steel ball.
6. Count the number of rotations the valve seat
rotates while removing it from the bottom of the
control valve housing using a 7/32" allen
wrench
NOTE
The valve seat is securely fastened to the bot-
tom of the valve port.
7. Assemble in the reverse order above, and per-
form the Pressure Relief Valve Adjustment
section. See Figure 6-140.
Figure 6-139.
Figure 6-140.
Log Splitters 2.fm Page 77 Wednesday, February 20, 2002 1:35 PM
Advertising